INDOT’s Reference Post System

In 1999, the Indiana Department of Transportation decided that it was time to come up with a system that would help better keep track of features along the roads that for which it was responsible. While is would be based, according to INDOT, on the mileage of the road, it was not a milepost system. It was a locator for maintenance items, other than signs, on the state highway system.

There are many parts to the system. The one that most people would have seen, but not really noticed, were the signs that were put up for use with the system. These consisted of small blue signs with a mile number on it, with a smaller sign, if needed, below it with an offset to that mile on it. The signs themselves were barely wider than the post they were on. Very small in relation to most highway signs. Since they are technically only for INDOT use, their size wasn’t a concern. The public wouldn’t notice them, lessening the sign pollution that departments of transportation have been trying to keep under control forever.

I really wish I could have had a better snippet for the offset post, but then, the idea was to give the reader the image of what they roughly look like, so the reader would know what to look for.

The RPS manual is very detailed in its information. For instance, the picture to the left is listed as “RP_U_40_Post_86,” meaning “Reference Post, US 40, Post 86.” The one on the right is listed as “CUMBERLAND CORP. LINE BR 4588 O BUCK CREEK,” at least in the 2004 manual.

US 40 is a very prime example of why this system isn’t to be used as a mileage post system. The system was setup prior to the 1 July 1999 decommissioning of US 31, SR 37 and US 40 inside the Interstate 465 loop. What was, in 1999, marked as mile 86 on US 40 is, in 2020, at mile 92.37 on that very same road in 2004. In 2016, the last update from INDOT, it was listed as US 40 mile 65.179. The legal definition of US 40 was lengthened when it was rerouted along the southside of Indianapolis on I-465 in 2004. By a little over six miles. By 2016, the extra mileage along I-465 was removed to show a more accurate road mileage count towards INDOT’s limit of 12,000 miles.

But there is a bit more to the reference post system that comes into play. Each highway listed in the RPS not only includes the complete mileage for the road in Indiana, but they are also listed by the mileage per county, as well. For instance, reference post 86 above is listed as Marion County mile 24.06 in 2004. In the 2016 manual, that mileage is 5.027.

Then, the reference post system records almost everything along the road. This includes EVERY village/town/city street that intersects with the posted road. For instance, near reference post 86 is, in the 2004 manual, “86 + 0.21 24.52 IR 4193 LT (DELBRICK LN).” At reference post location 86.21, 24.52 route miles into Marion County, Delbrick Lane connects to Washington Street (US 40) on the left (north) side of the road. Directions are listed from the increasing number of the reference post. Every street is listed, although almost none of them have a reference post sign.

Also, the corporation limits of towns and cities are listed by the reference post location, although there is no reference post installed most of the time. This even includes old corporation limits. For instance, in the 2016 manual, reference post 85+0.686 is listed as “City or Town Limit – Indianapolis.” Post Road is reference post 86+0.668. Legally, Indianapolis continues for another at least two miles (the sign welcoming one to Indianapolis is west of German Church Road, the county line is another mile east of that, but that is in the town of Cumberland. And even legally, Cumberland is part of Indianapolis. It is as confusing as all get out, but suffice it to say, for the past 50 years, the city limits of Indianapolis have been the county limits of Marion County, with some exceptions. Certainly not Post Road.

But the idea of the legal multiplex of I-465 with almost every INDOT road in Marion County (there are two that don’t mix with I-465: US 136 and SR 135) that brings up another question. What about multiplexes of state roads?

When the system was created in 1999, it was designed with a hierarchy of roads. That hierarchy was interstate, US highway, then state road, in that order. INDOT does not use the term “multiplex” officially. It is called “travel over” in Indiana. The following picture comes from the INDOT RPS guide of 1999 showing how “travel overs” are handled when it comes to marking the mileage of the road.

As you can see, near Frankfort, US 421 takes precedence with the little blue signs. SR 39 is junior to SR 38 when it comes to the signs, only due to the fact that 38 is before 39 numerically.

The system underwent some changes between 2004 and 2015. In 2015, it was made perfectly clear that the manual may contain some mistakes, but that every effort was taken to avoid them.

There was also a special note involving US 40 in Vigo County. When US 40 was removed from most of Vigo County, and rerouted along I-70 and SR 46, the RPS system was not changed to reflect that. The section of US 40 that “travels over” SR 46 is still labelled as SR 46. Here is INDOT’s explanation: “US 40 in Vigo County has a special issue that needs to be addressed. Due to relinquishments and creating a travel over for US 40, the alignment does not follow the historic path. US 40 now traverses where SR 46 has traditionally been and SR 46 is considered the Travel Over on US 40. However, the existing reference posts are still for the SR 46 route and are running in a contrary direction to the increasing direction of US 40. Therefore, for the purposes of this book, RP and Offset for the first 3 miles of US are based on the State Log Measure until it reaches the traditional location for US 40 and then jumps to RP 11 + 00 at the intersection of SR 46 and US 40.”

I mentioned above about the original system being put in place prior to the decommissioning of routes in Marion County. It is important to note that there were more routes affected than just those that were moved to I-465. Those routes were US 31, SR 37 and US 40. The mileage on those roads got weird, yes. But there were two others that were affected by the change…and one most people didn’t even realize.

SR 135 was rerouted from Troy Avenue to Thompson Road, cutting two miles out of the official route. This just required moving the little blue signs from north of Thompson Road, and surveying what else would need signs. And what wouldn’t.

The other route affect wasn’t even marked when it was decommissioned. Shadeland Avenue on the east side of Marion County was still legally SR 100 from I-465 to US 40 (Washington Street) until 1 July 1999. For the longest time, the only marker on SR 100 was a smaller blue sign below the reference post signs that read “100.”

INDOT has available on their website the RPS manuals for 2004, 2015 and 2016. Also available is the users guide from 1999. Here are the links for each: Users Guide – 2004 – 2015 – 2016