SR 67 in Northeast Marion County

When the Great Renumbering occurred on 1 October 1926, the number 67 was assigned to the Pendleton Pike connecting Indianapolis to Pendleton, through Lawrence and Oaklandon. This would be part of the greater State Road 67 stretching from Vincennes to Muncie…and later to the Ohio State Line. But the route in Indianapolis, and northeast Marion County, would carry the road along Massachusetts Avenue to the city limits, where the name would change to Pendleton Pike.

One of the first changes would involve the adding of US 36 to the same path. Although US 36 is higher in priority, most of the businesses along the old route kept the “67” as part of their names if it included it. As a matter of fact, I find it hard to believe that even today, there are no businesses along that road that include the number “36,” at least as I can recall. But there is a Motel 6t7…with a US route shield shaped sign…as shown to the left.

Changes were being planned for the road in 1933, when it was decided that SR 67 (and as a result, US 36) would be three laned from Indianapolis to Anderson. This would result in a change in the historic path of the Pendleton Pike from northeast of the then town of Lawrence to just south of Pendleton. In Oaklandon, for instance, the old SR 67 followed the current path of Pendleton Pike to what is now Oaklandon Road (formerly Germantown Road, named after the village that is now currently under water in Geist Reservoir at the Marion-Hamilton County line). The road then went north on Germantown (Oaklandon) to Broadway, turning northeast on that street. The old connection between Broadway (old SR 67) and the current Pendleton Pike (US 36/SR 67) still can be seen northeast of Oaklandon.

In 1935, the State Highway Commission decided that the number of miles inside the City of Indianapolis that it had to maintain would best be served if the number was lower. At the time, most of the northern city limit was at 38th Street, the dividing line between the middle tier and northern tier of townships. Where the Pendleton Pike now ends, at 38th Street west of Shadeland, was where the city ended at that point in history.

A bridge contract was let to Edward F. Smith to build a five span, 217 foot long bridge over the Big Four Railroad along 38th Street west of the intersection with SR 67, which was Massachusetts Avenue/Pendleton Pike. The bridge, in 1935, cost $143,825.01. The Indianapolis News of 25 May 1935 states that “Thirty-eighth street, with this and other contemplated improvements, is to become State Road 67. Construction will start in a few days and is scheduled to be completed by November 15.” Plans to move SR 67 to the 38th Street corridor were mentioned in newspapers as far back as June 1933, when plans for a new Fall Creek bridge on 38th Street, near the State Fair Grounds, were in the works.

While construction was going on between Indianapolis and Anderson in 1935, the official detour route had changed in late June. The original detour involved taking US 40 to Greenfield, then north on SR 9 to Pendleton. The new official detour recommended using SR 13 (became SR 37, now Allisonville Road) to SR 32 in Noblesville, then SR 32 to Anderson. This was recommended over the SR 38 route to Pendleton since SR 32 was a hard surface road, and large section of the newly added SR 38 were still gravel.

By 1937, SR 67 would find itself skirting Indianapolis, at least on the north side, along 38th Street. The old SR 67, Massachusetts Avenue, would find itself labelled SR 367. The three lane project between Indianapolis and Anderson would be completed, and Oaklandon would find itself bypassed by one of the two transportation facilities that made it possible. Now, most of what is left of SR 67 on the northeast side of Marion County (Pendleton Pike from I-465 east) is at least five lanes wide…but quite a bit of it is seven.

Straightening of SR 135 in Northern Washington County

Sometimes, the state moves very slowly when it comes to improving routes that, well, from first glance, should have been higher on the priority list. When SR 35 was created with the Great Renumbering of 1 October 1926, a lot of the route was pretty straight forward. That was until you got to just south of the Muscatatuck River in Washington County. Here, the road was the definitive hilly road.

Monroe Township, Washington County
1878

And the road had been that way for a long time. The 1878 map snippet shown to the left shows the Millport Ferry, which was in the location, roughly, of the current SR 135 bridge over the Muscatatuck River. From there, the “direct” route to the next post office, that being at Millport, winds its way through the hilly territory south of the river.

And this routing hadn’t changed. Until the Indiana State Highway Commission started designing a new road to replace the old one in 1954. Yes, nearly three decades after it became a state road, SR 135 (formerly SR 35) was getting some work to make it safer for travelers.

The bridge just west of the old bridge at the location of the old Millport Ferry was opened for bidding in September 1954. The design of the bridge was to be of seven spans, 28 foot of right of way for drivers, and 26 inch pedestrian walkways on each side. The bidding, opened on 21 September of that year, only included the bridge itself. Approaches to the bridge were to be let in another contract. It also didn’t include the tie in to the then current road north of the river.

The bridge that was being replaced had been contracted in 1883. The superstructure of that bridge, to be built completely of iron, was contracted to cost $23.00 a linear foot.

Work on the design of the new SR 135 section was completed in March 1954. According to the Seymour Tribune of 18 March 1954, “It is understood plans for the new highway are normally straight, with the new location scheduled to eliminate the present many curves on the highway, which now has about 40 turns, many of them sharp, in less than two miles.”

Construction on the new section of the road began on 6 June 1955, and according to the Jackson County Banner of 3 August 1955, was expected to “be completed about the first of next year.” The contract connecting the new SR 135 to the new Millport Bridge would be let later, as the bridge had not been completed by that time. Until that bridge was complete, the old bridge would be in use, and the new SR 135 would connect to the old SR 135 just south of the new bridge. The following Google Map snippet shows the old road, the connection to the new road, and the location of the old bridge.

The new section of road would open in mid-December 1955. The entire route was concrete, with the exception of the south approach to the new Millport bridge, which was graveled to allow traffic access to the new bridge. The gravel would be replaced with concrete the following summer. The old iron Millport bridge would be removed soon after the opening of the road.

OSR 2/US 30 at Plymouth

When the Indiana state highway system was being expanded in 1920, one of the additions was what was, at the time, the Yellowstone Trail from Valparaiso to Fort Wayne. This Auto Trail snaked its way across the Hoosier landscape, nowhere near anything resembling a straight line. It was added to the system as SR 44, connecting at both ends with SR 2, or the Lincoln Highway. The original route had the road entering Plymouth from the west and the south. The Yellowstone Trail, and the state highway that came after, didn’t go straight through the Marshall County seat.

1923 Indiana Official State Highway Map showing SR 2 between Hamlet and Columbia City.

That was about to change. But first, a number change was in order. In 1923, the Indiana State Highway Commission started changing state road numbers. One of those that would change would be the Lincoln Highway…and SR 44. The SR 2 designation was moved from the Lincoln Highway to the Yellowstone Trail. This “straightened” the road between Valparaiso and Fort Wayne…SR 2 no longer ran through Goshen, Elkhart and South Bend. But the road still was a winding mess between Warsaw and Plymouth.

With the concept of federal aid funding sitting in the background, the state decided it wanted to fix the twists and turns of the original Yellowstone path. The first reference to this project that I found was in August 1925…but it wasn’t good news. The project was “abandoned” due to a $5 million shortfall in federal funding. Or, more to the point, a belief that the state was going to get $5 million from the federal government that hadn’t quite made it to Indianapolis. Two projects were actually put on hold with that shortfall…both of which were in northern Indiana. One was the SR 2 project. The other was the Dunes Highway along Lake Michigan.

The article that made it to most Indiana newspapers in mid-August 1925 lamented that the northern part of the state would be paying for the delays in funding. It also mentioned that most of the road was a hard surface (paved) road from Columbia City eastward to Fort Wayne. The section shown both in the map above and the one below show that the road is “gravel or stone (not treated)” between Warsaw and at least Hamlet…through Plymouth.

1926 Indiana Official State Highway Map showing the new US 30 (former SR 2) from Hamlet to Columbia City. This map also shows the pending reroute of the same road from Warsaw to Hamlet.

The new maps issued in late September and early October 1926, with the Great Renumbering, show the construction is at least still planned, as the circles on the map are listed as “proposed relocations.” The new US 30, which was SR 2, would be given a straighter route from Warsaw to Plymouth. And it would actually enter Plymouth from the east, not follow SR 1/US 31 south out of town like it did originally.

In relative terms, it wouldn’t take long for this new road to be completed. The South Bend Tribune of 20 November 1927 reported that construction was almost complete in a plan to avoid crossing the Pennsylvania Railroad for 75 miles, something the old Yellowstone Trail/SR 2/US 30 did quite a bit. As of the writing of the article, 16 miles to the west of Plymouth were completed. This connected US 30 to SR 29 (now US 35), a “recently improved asphaltic macadam” road.

As a side note, the section west from SR 29 to Hanna was also part of the project, but was in a serious holding pattern. The road was “a stretch of about 10 miles in which no concrete has been laid and cannot be laid this year because of two sink holes in the vicinity of the Kankakee river which have materially resisted grading and filling by the contractors.” That section of US 30 is still in use today…albeit a bit wider than it was at that time.

East from Plymouth, the road was open, according to the Tribune, to Bourbon, a span of 10 miles. Four bridges being constructed between Aetna Green and Warsaw were all that was standing in the way of opening the road on or about 1 December. The article mentions that the route actually enters Plymouth from the east along Pennsylvania Avenue. This is due to a bridge on what is now called Lincoln Highway over the Yellow River being built. Pennsylvania Avenue connects to Michigan Street (old US 31) just north of the old Pennsylvania Railroad Fort Wayne Line (and, for those that are landmark oriented…right at the Penguin Point restaurant).

And, in case you are wondering, the name Lincoln Highway would be officially applied to this road in 1928, one year after this construction. The places where the name “Yellowstone Trail” still exist as a road name were sections of the original path of that road…parts that weren’t improved as a part of the state highway system.

Indianapolis and the Original ISHC State Road System

I have posted much about the creation of the Indiana State Highway Commission. As of the posting of this article, the age of the Commission is either 103 or 101 years old. The original ISHC was established in 1917…but met with a lot of problems. It was finally nailed down in 1919 and made permanent.

This also creates a dating problem when it comes to the state highways. The first five state highways, then known as Main Market Roads, were established in 1917 with the original ISHC. Two of those original Main Market Highways connected to Indianapolis. The original National Road had been given the number Main Market Road 3. The Range Line Road, connecting Indianapolis to Peru, and through further connections, to South Bend, was given the Main Market Road 1 label.

When it was finally established, the ISHC changed the name of the Main Market Road to State Road, in keeping with other states surrounding Indiana. The markers used along the roads, painted onto utility poles like the old Auto Trail markers were, resembled the image to the left…the state shape with the words “STATE ROAD” and the route number. In this case, as of 1920, State Road 2 was the original route of the Lincoln Highway through northern Indiana.

The state highway system was designed to, eventually, connect every county seat and town of over 5,000 population, to each other. Indianapolis, as the state capital and the largest city in the state, would have connections aiming in every direction. Most of those roads marked with the original numbers would still be state roads into the 1970s and early 1980s, before the Indiana Department of Highways started removing state roads inside the Interstate 465 loop…and INDOT finishing the job on 1 July 1999. These road were removed for state statutory limitation reasons, and I have discussed that in a previous blog entry. So I won’t do it here.

The original state road numbers that came to Indiana varied greatly, as did their directions. There were no set rules when it came to state road numbers. They were assigned as they came…and stayed that way until the first renumbering of 1923, or the Great Renumbering of 1926.

Let’s look at the original state roads in Marion County, some of which actually did not reach Indianapolis itself.

State Road 1: As mentioned before, State Road 1 was originally called Main Market Highway 1. North of Indianapolis, it followed the Range Line Road, a local Auto Trail, through Carmel, Westfield, to Kokomo and points north. The route north followed Meridian Street north to Westfield Boulevard, then Westfield Boulevard on out to Carmel and beyond. In Carmel, the old road is still called Range Line Road, and serves as the main north-south drag through the town, as it does in Westfield.

South of Indianapolis, State Road 1, like its Main Market Highway predecessor, followed the old Madison State Road out of the city to Southport, Greenwood, Franklin and Columbus. The original SR 1 route is still able to be driven through the south side of Indianapolis, with the exception of the section replaced in the 1950s by the Madison Avenue Expressway. But Old Madison Avenue exists, if you can find your way back there.

While the entirety of original State Road 1 became US 31 with the Great Renumbering, bypasses in Marion County were put in place very early. The northern section, through Broad Ripple, and Carmel was replaced as early as 1930. The southern section, including the Southport/Greenwood bypass, was put in place in the 1940s.

State Road 3: As mentioned above, Main Market Highway/State Road 3 followed the National Road through Marion County. One exception to this is the section of the 1830s National Road that crossed the White River downtown. That section of the old road was removed in 1904 with the demolition of the National Road covered bridge and its replacement with a new, and short lived, Washington Street bridge. With a couple of exceptions other than that (the Bridgeport straightening of the early 1930s, and the new Eagle Creek bridge built in the late 1930s), the old road was followed very accurately until the mid-1980s with the creation of White River State Park. The successor to original SR 3, US 40, was moved to make room for the park. Both US 40 and US 31 lost their designations on 1 July 1999 with the removal of those two routes inside the I-465 loop.

State Road 6: This old state road was a through route when it came to Marion County. From the north, it followed the route of the original Indianapolis-Lafayette State Road from Lebanon. After passing through downtown Indianapolis, it left the county using the original Michigan Road on its way to Shelbyville and Greensburg. The original State Road 6 followed the Michigan Road Auto Trail, not the Historic Michigan Road, meaning it still went to Madison, but it went by way of Versailles, which the historic road did not. With the Great Renumbering, the northern SR 6 became US 52, while the southern SR 6 became SR 29 – later to be renumbered again to US 421.

State Road 22: This road, as it was originally laid out, only lasted from 1920 to 1923. Out of Indianapolis, it followed the old Mooresville State Road through southwestern Marion County. It was designated the original route from Indianapolis to Martinsville, as described in this blog entry. This road will be discussed again a few paragraphs from now.

State Road 39: Another 1830s state road that was taken into the Indiana State Highway Commission’s custody in 1919. This road followed the old Brookville State Road from the National Road out of the county through New Palestine to Rushville and Brookville. The original end of that road, both the 1830s original and the 1919 state highway, is discussed here. The road would become, in October 1926, the other section of US 52 through Indianapolis. It would also eventually become the first state highway removed inside the I-465 loop in Marion County. And even then, it would be rerouted in the late 1990s to go the other way around the county.

That covers the 1919 highways. More would come to Marion County before 1923.

State Road 12: Originally, this road, north of Martinsville, was the old State Road 22 mentioned above. When a new SR 22 was created, the SR 12 number was continued from Martinsville to Indianapolis along the old Vincennes and Mooresville State Roads. This road, in October 1926, would become part of the new State Road 67.

State Road 15: While the southern route of the Michigan Road was State Road 6, the northern part, heading off to Logansport, was added later and given the number State Road 15. The entire route of the historic Michigan Road would never become a state highway, but major sections did…although late in the creation of the state highway system. With the Great Renumbering, this road became SR 29, and in 1951, redesignated, like its southern half, US 421.

State Road 22: Here we go again. State Road 22 was given to the route between Indianapolis and Paoli. In 1919, that included the route along the west bank of the White River from Martinsville to Indianapolis along the Mooresville Road. This was changed by 1923 to keep SR 22 on the east side of White River, where it followed the old Paoli State Road, and the Bluff Road, through Waverly to the south edge of downtown Indianapolis at Meridian and South Streets. This was one of the routes of the Dixie Highway through Indianapolis, and would later become part of SR 37 in 1926.

State Road 31: In 1920, when this road was originally created, it turned south to connect to the National Road west of Plainfield. It had followed the Rockville Road from Montezuma to Danville, then turned southeasterly to meet State Road 3. By 1923, the road was moved from what would later become part of what is now SR 39 to continuing on the Rockville Road into Marion County. State Road 31 would meet the National Road outside the city limits of Indianapolis at what is now the intersection of Holt Road and Washington Street. It would become US 36 before it was extended along the new section of what is now Rockville Road to the intersection at Eagle Creek with Washington Street.

State Road 37: One of two state road numbers that still served Indianapolis after the road numbers were changed in October 1926 (the other being State Road 31). The original State Road 37 left Marion County in a northeasterly direction on its way to Pendleton, Anderson and Muncie. Inside the city limits, the street name was Massachusetts Avenue. When it reached the city limits, the name of the road changed to Pendleton Pike. This still occurs today, with the name change at the old city limits at 38th Street. In October 1926, the number of this road would change to State Road 67.

There were two other major state roads in Marion County, but they weren’t part of the state highway system until after the Great Renumbering. One was the Crawfordsville State Road, part of the original Dixie Highway, connecting Indianapolis to Crawfordsville via Speedway, Clermont, Brownsburg, and half a dozen other towns. It would be added to the state highway system by 1929 as State Road 34. The number would change later to US 136.

The other road was the original Fort Wayne State Road, also known as the Noblesville State Road, but even more commonly called the Allisonville Road. It would be added to the state highway system in 1932 as State Road 13. Less than a decade later, its number would be changed to the more familiar State Road 37.

National Road at Reelsville

1952 USGS topographic map of the Reelsville area.

When the National Road came to Indiana, part of the requirements for the building of the road was that it be in as straight a line a possible connecting Indianapolis to Vandalia, Illinois (then the capital of that state). Southwest of Indianapolis, the terrain got a little rough to be able to maintain a straight line. Especially in Putnam County. But the surveyors did a very good job in keeping it as straight a line as possible.

1864 map of southwestern Putnam County courtesy of the Library Of Congress. The National Road runs through the southern part of Section 19, the center of Sections 20 through 23. The Big Walnut Creek bridge that washed out in 1875 is in the eastern central portion of Section 20.

And so, the National Road chugged along for around four decades. In 1875, a bridge over Big Walnut Creek, southwest of Reelsville was washed out…and not replaced at the time. Since the National Road, at the time, belonged to a private company, they decided to reroute the road through the town of Reelsville. This would solve the connection problem, road wise, between Terre Haute and Indianapolis, but would create a few more while it was at it.

The Terre Haute & Richmond (TH&R) Railroad was chartered on 24 January 1847 to connect the two title cities through Indianapolis. By 1852, the TH&R had built a railroad connecting Terre Haute to Indianapolis. This railroad, near Reelsville, was to the north of Big Walnut Creek from where the National Road was, and connected to the town of Reelsville proper. There was even a station at Reelsville. On 6 March 1865, the Terre Haute & Richmond became the Terre Haute & Indianapolis.

The National Road replacement route took travelers up a long hill into Reelsville. At the town, the new road, which had been in place long before being used as a bypass, followed and crossed the TH&I several times before reconnecting to the original National Road. These railroad crossings were considered some of the worst in the state, especially due to the angle of the crossing.

1912 United States Postal Service map of southwestern Putnam county showing the roads around Reelsville. Notice that the National Road, marked as Mail Road RE 2 east of Reelsville, does continue after turning north to enter Reelsville proper. The old road did still contain houses, even though through traffic had been gone from the route for 37 years.

The Terre Haute & Indianapolis Railroad ceased to exist as a separate entity on 1 January 1905. That was the day that the TH&I, the St. Louis, Vandalia & Terre Haute, the Terre Haute & Logansport, the Logansport & Toledo and the Indianapolis & Vincennes merged to become the Vandalia Railroad Company. Among the items that were taken up by the new Vandalia was the crossings near Reelsville. Money was set aside in 1907 to correct the problem. By the end of 1912 (October to be exact), the Brazil Daily Times was reporting that no such work had been completed to date.

Part of the plan in 1912 was to return the original National Road route to use. According to the same article in the Brazil Daily Times, this would cut 1/2 mile off of the route then in use through Reelsville. And, the railroad crossing situation, with its inherent dangers, would be addressed…and partially eliminated. But, as with other well laid out plans, this did not go to schedule. At all.

The National Old Trails Road, an Auto Trail that, through Indiana, mostly followed the original National Road used the Reelsville cut off when it was created. The old route was still out of commission at Big Walnut Creek. This situation would not be resolved until after the (second) creation of the Indiana State Highway Commission in 1919. ISHC surveyors were out in the field looking at ways to improve the situation at Reelsville, with the decision made that a bridge would be built in the same location that had been used over 80 years prior when the National Road, now called State Road 3, was built. The new bridge would be a concrete arch facility.

Even then, the new bridge for the National Road would take some time to get started. Over two years, as a matter of fact. Construction started on the replacement of the National Road in January 1922. The winter that year was relatively mild, allowing for construction to start very early in the year. But it was decided that the new route of State Road 3 would skirt the Pennsylvania Lines (the then operators, later owners, of what was the Vandalia Railroad) to the south, bringing the new National Road closer to the Big Walnut Creek.

Even then, the replacement route would only be in place for less than two decades. The Highway Commission made plans to make a true four lane highway across Indiana along what was then the US 40 corridor (which was original State Road 3 until the Great Renumbering of 1 October 1926). The new new road would take a straight course through the area south of Reelsville, the railroad and the old new path of SR 3/US 40. This realignment would occur in 1941.

Editor’s Note: This post took a long time to convince me to write. There are several subjects that I have been avoiding because they are MUCH better covered by others. In this case, my Co-Admin of the Facebook ITH Group, Jim Grey, covered it much better than I ever will. And, generally, he has done a great job covering the entire National Road. His post, “Puzzle solved: The National Road at Pleasant Gardens and Reelsville in Indiana,” served as the spring board for this post. The irony is that some articles that I posted in the ITH Facebook group led to the puzzles being solved for Jim. Such is the way of the world in this field. I recommend checking out Jim’s stuff when you get the chance. He is more of a road trip person, going out to see what’s on the ground. I tend to look more into the documented history of the same scenes.