Adeway

Many highways were given names in the Auto Trail era. One that always intrigued me, and I have yet to find a good history for, is a road that led from Indianapolis to Chicago. It was called the “Adeway.” The best map of the route that I have found, however, shows the road only going from Crawfordsville to Chicago. That map is from 1923, and is available at the Indiana State Library online.

The Adeway left Crawfordsville via Lafayette Avenue, traveling northeast before coming to Old Oak Hill Road near the intersection of current US 231 and Lafayette Avenue. The old auto trail would follow Old Oak Hill Road, and Oak Hill Road, until it becomes what is now Old State Road 55. It would follow what would become SR 55 in 1932 all the way to just east of Wingate. The original route crosses private property now, as it would connect directly to Crawfordsville Road in Wingate. Today, it turns west onto Wabash Street. The Crawfordsville Road intersection has been moved to make a perpendicular junction between the two roads. The original route can still be seen in grass markings in the following Google Maps snippet from 25 October 2020.

From Wingate, the original Adeway would follow what is now SR 55 to Newtown. From Newtown, the road would turn north along what is now SR 341, following that current state road to what is now SR 28. The auto trail turned west along the current SR 28 to Attica. At Attica, instead of turning onto Jackson Street, as SR 28 does now, it continued along Main Street, then Mill Street, and would cross the Wabash River along the old Mill Street bridge. The current state road, and US 41, crosses at Jackson Street.

After crossing the Wabash, the original auto trail would turn on what is now Old SR 55…but that route goes into private property today. It is best to use current SR 55 north of US 41 to approximate the old road. There are places where the current state road was straightened for ease of use and safety, but it is still very close to the original country road that would become part of the Adeway.

At Warren County Road 600 North, the Adeway turned west. It would curve several times, then turn west again on Warren County Road 650 North heading towards Rainsville. The old highway follows what is now Rainsville Road to just before SR 26. The road had been moved for safety at this point. The old Rainsville Road was part of SR 26 before the move. It can be clearly seen on this Google Map snippet of 25 October 2020.

The Adeway then turned north along what is now Meridian Line Road, right at the end of the current bypassed section. This would take travelers (mostly) due north through Fowler, where the street is still called Adeway. After crossing the current US 52, the street becomes known as Washington Street, but also happens to be SR 55 once again for its trip northward through the Benton County countryside.

In an effort to maintain its own way, the Adeway would turn west on what is now Newton County Road 1700 South. This is one mile south of the Illinois Corn Belt Route, which would later become part of US 24 across northern Indiana. The highway would follow SR 1700S until it would turn north along what is now US 41, travelling into Kentland.

Although the road had been straightened in places, the US 41 route approximates the old Adeway route. At Benton County Road 900 South (which east from US 41 is SR 16), the Adeway turned west again…to enter the town of Ade. One might assume that this is where the road got its name…but I am not going to jump to that conclusion until I have more facts.

From Ade, the old highway followed CR 275 West and CR 300 West north through Morocco and onto what is now US 41 (again) northward to Enos. The distance from Ade to Enos is 10 miles according to the Rand McNally Auto Trails Map of 1920. At Enos, the old route leaves the current state highway system again, this time for a short jaunt along CR 100 North to CR 400 West. Five miles later, the old route turns east, along CR 600 North, to connect to CR 300 West, which is still US 41. Just north of the intersection of US 41 and CR 600 North was a place called Conrad. The name still exists there, but not as a town of any kind.

The Adeway still follows US 41 north until just south of Lake Village. Here, the new road bypasses the town, while the old road, called Old 41, enters the town, as did the Adeway. North of Lake Village, the old road connects back to US 41, but doesn’t share that route long. Just south of Schneider, US 41 veers off to the northwest, while the old route continued straight through the town along what is now Parrish Avenue. At what is now 219th Avenue, the Adeway turned east, then north again along what is now Austin Avenue for its journey towards Lowell.

The journey continues along Austin Avenue until the junction of Belshaw Road, where the Adeway turned northeast to Cline Avenue, one-half mile east of Austin. The route entered Lowell on Cline Avenue, but left on Morse Avenue. Here the old highway followed Morse Avenue north and then west along the northern edge of Cedar Lake. It followed what is now Lake Shore Drive until it turns into 135th Avenue. There, it followed what is now 135th Avenue west across US 41 again, until Calumet Avenue near Brunswick.

Turning north along Calumet Avenue, the next turn would be at what is now 101st Avenue near Keitzburg. West along 101st, the Adeway then turned north again on what is now Sheffield Avenue. It then followed Sheffield Avenue/Hart Avenue (Dyer)/Sheffield Avenue until it became what is now Columbia Avenue. The old route then connected back to Calumet Avenue, which it followed all the way up to Indianapolis Boulevard, for a northwesterly turn towards Chicago. From the connection of Columbia and Calumet Avenues, the road is not part of the state highway system. At I-94, Calumet Avenue becomes part of US 41, and the Adeway follows that road designation into Chicago.

As is typical of the Auto Trail era, the journey of the Adeway from Crawfordsville to Chigago is nowhere near a straight journey. It winds through the northwestern Indiana countryside, meandering its way from point a to point b. But it would make one heck of a road trip, should one want to do such a thing.

Dec 1917: Main Market Roads Officially Announced

When the law creating the Indiana State Highway Commission was passed in early 1917, the announcement was also made that there were would five main market highways, later known as state roads, designated by that commission. There was a general idea of which roads would be involved, bot nothing set in stone. That is, until December 1917.

The Fort Wayne Journal-Gazette of 12 December 1917 announced the selection of the new main market highways. ISHC officials traveled throughout the state deciding which roads would be part of the new, and yet controversial, system. “A former election of four of the five routes was tentative, and although the general directions of the four roads announced formerly have been adhered to in the official selection, many changes have been made.”

The plan was to create a system which was typical of Indiana’s general demeanor: serve as many people as possible with as little cost and intrusion as possible. Due to the shape of the state of Indiana, it was decided that there would be three roads crossing the state, west to east, from the Illinois state line to the Ohio state line. One north-south road would be designated through the middle of the state. This was the basis of the first four main market roads. A fifth road would connect the fourth road to the Illinois state line in the southern part of the state. The December 1917 system included roughly 800 miles of roads.

The main market highways were officially described as follows: “No. 1. The highway beginning at the Indiana and Michigan state line, thence southerly through South Bend, Plymouth, Rochester, Peru, Kokomo, Westfield, Carmel, Indianapolis, Franklin, Columbus, Seymour, Scottsburg, Sellersburg, New Albany and Jeffersonville.” In the Auto Trail era, there was no one highway this route followed. It seems that it was planned very early to have a split in the highway at the south end, with one branch going to New Albany, and one going to Jeffersonville. And although the route numbers have changed, that split has existed in one form or another since that time.

Main Market Road #2: “The highway passing through the northern part of the state, beginning, at the Illinois and Indiana state line, thence easterly through Dyer, Valparaiso, Laporte, South Bend, Goshen and Fort Wayne via the Lincoln Highway to the Ohio and Indiana state line.” Depending on how one reads that, it could be that the Lincoln Highway was only used from Fort Wayne to the Ohio state line. This is far from true. It was decided that the entire original route of the Lincoln Highway through the state would be used for Road #2.

Main Market Road #3: “The highway crossing the central part of the state, commonly called the old national road trail, beginning at the corner of the Illinois and Indiana state line, thence easterly through Terre Haute, Brazil, Putnamville, Plainfield, Indianapolis, Greenfield, Knightstown, Cambridge City and Richmond to the Ohio and Indiana state line.”

Main Market Road #4: “The road crossing the southern part of the state, beginning at Evansville, thence easterly through Boonville, Huntingburg, Jasper, West Baden, Paoli, Mitchell, Bedford, Seymour, North Vernon, Versailles, Dillsboro, Aurora and Lawrenceburg to the Ohio and Indiana state line.”

Main Market Road #5: “The road connecting Vincennes and Mitchell, via Wheatland, Washington, Loogootee and Shoals.” Basically, this road was designated to connect main market road 4 to Vincennes. Again, this is due to the shape of the state. A (more or less) straight line across Indiana from Cincinnati west would, as is shown by the route of the current US 50, connect to Vincennes, leaving people south of there without a main market road. Evansville was, and still is, one of the top five largest cities in the state, population wise. So ignoring that city would not have been possible.

The article ends with the following: “The total mileage of the roads represents less than one-half of the total 2,000 miles of ‘main market highways’ which the commission may designate under the new state highway commission law prior to 1921.” The law that passed in 1917 created a state highway system so that Indiana could benefit from federal money for good roads. It wasn’t until the law was redone in 1919, with all of the 1917 law’s Constitutional questions answered, that the Indiana State Highway System was officially made part of the landscape.